Sound Control Technologies - Icon 600 to VISCA Camera via Cat-5e/6 Extender

File uploaded by mcook Employee on Oct 19, 2017Last modified by michaelt on Oct 19, 2017
Version 2Show Document
  • View in full screen mode

Following on from the richdwa post "Detailed instructions for connecting and controlling a 3rd-party camera from an Icon 600/800", we reached out to Chris Audette from Sound Control Technologies. to see if they had a solution that could extend both the signal and VISCA control signalling over a single Cat-5e/6 cable.


Chris kindly shared the PDF above with us, that shows a Sony SRG series (VISCA) Camera connected to a Lifesize Icon 600 via the Sound Control Technologies RC4 Cat 5e/6 Extender solution. Per the diagram, all signal and camera control information is sent over the single Cat-5e/6 cable between the two SCT devices, eliminating the need for independent signal and VISCA extension cables.


Thanks again to Chris for providing this information, I'm sure many of our system integrators will find it useful.


Matt Cook

Lifesize SE - UK, Ireland, BeNeLux and Nordics