i remember the VOIP can be done by the 2nd gen phone alone.
what if the phone is already connected to an icon600.
can it still make VOIP call within the network or even do PSTN call (IPBX)?
if so, is there any reference about how to set it up?
The Gen 2 phone is not able to be configured as a stand alone device, but you can register the Gen 2 phone for voip calls through the codec WEB GUi using SIP register 1, or SIP register 2 if connected to ClearSea or Cloud
Technical Support Engineer
00 800 5433 7493 (EU)
Currently only the Generation 1 phone can be used as a stand alone device.
ok, then it is not the case, the customer only has their voip system, none with clearsea nor cloud.
As said above yes you can !.
You say 2nd Gen phone connected on Icon 600.
They say: use SIP registrar 1 or if that one is in use than use Sip registrar 2 to connect to your voip system.
Retrieving data ...