We want to output remote site audio and local site audio from the ICON HDMI output.
Is there a setting to enable this for ICON450 and ICON700?
This was possible via an unsupported menu on the 220 series (for local recording purposes prior to Videocenter and cloud recording being available) but not on the Icons.
do you mean you want audio output to route through the HDMI source and not the Lifesize Phone, if that's the case, you can definitely do that through the web interface
Thank you for reply.
We don't use Phone, please excuse my lack of explanation.
We want to connect HDMI output of ICON to the recording device, however the HDMI output of ICON only outputs the remote site audio.We want to output the remote site audio and local site audio together from the ICON HDMI output.
I think I get what you are saying but I doubt that’s possible. If you were able to mix local audio with remote audio, you would essentially be creating feedback. In a normal scenario, you would never want your local audio feeding back out through the HDMI source. Unless you had some other audio gear tied into this for example a biamp system, I can’t see how that could be accomplished with the icon system alone. What type of recorder are you using?
>If you were able to mix local audio with remote audio, you would essentially be creating feedback. >In a normal scenario, you would never want your local audio feeding back out through the HDMI source.
Thank you for answer!
Retrieving data ...